Volume 21 Issue 3
Published: 2013-06-01
Contents
Article
StudyTheEffect of Speed, Impinging Angle and Slurry Concentration on Erosion of Stainless Steel -316L
Hazim Mohammed Matloob, Abdulhaqq A. Hamed
AbstractThe main aim of the present research work is focused on the influence of key parameters, such as; impinging angle, rotational speed, and concentration of sand in water on the behaviour and...
DOI: 10.33899/rengj.2013.75436
A Novel Experimental Study of Single–Plane Balancing Method of Crankshaft without Phase AnglesData(ENG)
Mohammed Tariq Sulaiman ِم Abbood Al Taee
AbstractIn real machines, rotating parts are balanced using data of both phase anglesandvibration values. This paper presents an analytical solution of a novel singleplane balancing method using...
DOI: 10.33899/rengj.2013.75561
Estimation of Reference Evapotranspiration by Predicting Temperature Values Using a Stochastic Model
Dr.Taymoor A. Awchi, Mr.Ihsan F. Hasan
AbstractIn this research, the stochastic model (ARIMA) was applied to modeling the monthly temperature values for the area of Mosul, Northern Iraq, by utilizing the time-series data of monthly mean...
DOI: 10.33899/rengj.2013.75441
Spatial Sustainability in Historical Urban Centers The role of Spatial Distribution of Mosques in the Spatial Sustainability in Mosul Old City
M.H. Aldewaje, Dr.T.H. Ali, Dr.O.H. Al-Nuaemi
Abstract:The city represents a multi-systems physical entity associated with a range of relationships in various aspects, which organize space, time, meaning and means of communication through many...
DOI: 10.33899/rengj.2013.75438
Optimal Timing of One Supplemental Irrigation
Dr. EmanHazim Sheet, Dr. Nawal M . Jajjo
A computer simulation model is developed to study the effect of adding one supplemental irrigation of 75mm on the relative yield of wheat . The growing season of wheat is divided into 26 weeks and...
DOI: 10.33899/rengj.2013.75442
An Assessment of the Impact of Extension on Preservation of The Heritage Mosques in Mosul Old City
Dr.Hassan MahmoodHaj Kasim, Dr.Emad Hani Al-Allaf
Abstract Heritage mosques of Mosul Old City (MOC) are characterized from other public buildings that it has a permanent function and its need for the extension over time. This renewed and vital...
DOI: 10.33899/rengj.2013.75440
Seismic Evaluation of Reinforced Concrete Frames Using Pushover Analysis(eng)
Sofyan. Y. Ahmed
AbstractTen storiesfive bays reinforced concrete frame (two dimensional beams and columns system) subjected to seismic hazard of the Mosul city/Iraq is analyzed. Plastic hinge is used to represent...
DOI: 10.33899/rengj.2013.75445
Durability & Strength of Limestone Used in Building(eng)
SuhailIdrees . A. Khattab, hadeel Mohammed S. Othman
AbstractThe deterioration of limestone rocks selected from three quarries in Mosul city (Baathra, Baghdad street & AL-Warshan), due to different liquids movement inside the pore network was...
DOI: 10.33899/rengj.2013.75443
Fresh and Hardened Properties of Self- Compacted Concrete at Different Curing Regimes(eng)
M. Abdul-Aziz, J. R. Al-Feel
AbstractThe aim of this study is to compare the properties of three self-compacted concrete (SCC) mixes, with normal concrete mix. For the SCC mixes, the cement was replaced partially with either...
DOI: 10.33899/rengj.2013.75446
Weight Optimization of Syme Socket Prosthesis
Bakr Noori Khudher
AbstractIn this paper the finite element analysis was achieved on the Syme socket prosthesis to know the possibility of weight reduction of the socket. Previous works were restricted to stress...
DOI: 10.33899/rengj.2013.75557
Microclimate Performance inDifferent Urban Fabric in Mosul City(eng)
Turki Hassan Ali, Bahjat Rashad Shaheen
AbstractCity of Mosul has a traditional urban core called old city, side by side with a modern fabric adopted by municipal authority since the rapid urbanization which the city had witnessed in the...
DOI: 10.33899/rengj.2013.75578
Hybrid Mesh Technique to Model a Deep Bar Induction Motor Using Time Stepping Finite Elements Analysis(ENG)
Prof. Basil M Saied, Ahmed J. Ali
AbstractThis paper presents a 2-D nonlinear transient analysis using Finite Elements Method (FEM) to model a three phase deep bar cage induction motor. Accurate representation for this type of...
DOI: 10.33899/rengj.2013.75569
Stress Analysis of Steam Turbine Blades at The last Stage in BejiThermal power Station
Dr. Sabah M.J. Ali, Alaa M. Abdullah
ABSTRACTThe low pressure steam Turbine blades are suffering especially the longest parts a bad history of failure. The breakage reasons are unknown due to its complexity. The aim of this work...
DOI: 10.33899/rengj.2013.75431
Variation of Styles in Islamic Architecture and Effects it on The Changing of The Spatial Configuration of Madrasat Buildings
R. S. A. Al numman, D.H. R. Al - omari
AbstractThe phenomenon of unity and diversity is the most important feature that characterized the Islamic architecture, and the Islamic religion had a active role in the creation of this...
DOI: 10.33899/rengj.2013.75437
Buckling behavior of aluminum plate with circular and elliptical shapes of central cutout
Raid H. Matti, Dr. Rafi K. Al-bazzaz
AbstractThe present work performs mechanical buckling analyses and experimental investigation on square plates with central cutout with (circular and elliptical) shape and with different size under...
DOI: 10.33899/rengj.2013.75426
Prediction of Soil's Compaction Parameter Using Artificial Neural Network(eng)
RaghdanZuhair Al-saffar, Dr. SuhailI.Khattab, Dr. salem taib
Abstract This research tackles the feasibility of using Artificial Neural Networks to capture nonlinear interactions between various soil parameters.In this study an attempt was conducted to...
DOI: 10.33899/rengj.2013.75444
Khassa Chay Stream Flow Forecasting by Markove Autoregressive AR. Model.(eng)
Dr. Cheleng A. Arselan, Jasim M . Kadir
AbstractIn this research a successfull analysis of the monthly mean of Khassa Chay stream flow record for the period (1941-2001) was adopted, then the Markove Autoregressive AR model was fitted to...
DOI: 10.33899/rengj.2013.75576
Aggregate Production Planning Using Goals Programming(ENG)
Monim A. Gasim
AbstractThis paper investigates Aggregate Production Planning (APP) model in a multi-plant producing multi-product to satisfy portion of fully deterministic demand in several cities for short term...
DOI: 10.33899/rengj.2013.75564
